KO TECHNOLOGIES- CUSTOM DRIVE TRAIN AND BRUSHLESS MOTOR DESIGN.
INDUSTRY LEADING FIRST PERSON VIEW MOTORS
Our FPV motors boast a whole range of technical achievements and industry firsts
OPEN CAGE BEARINGS
CRYO STATOR
FULLY REBUILDABLE
The Method range of motors al come with a removable base plate that can be easily switched out if required. This also doubles up as a sump for RaceX oil.
All of our method series motors come fully equipped with a CRYO tech capable stator. To find out more about CRYO click here.
The Method X has been designed from the ground up to be fully rebuildable and easy to disassemble. Check out the additional information below.
CRYO TECHNOLOGY - RACE OIL X - ACPC - OPEN CAGE BEARINGS - REMOVABLE BASE PLATE - WET SUMP
The Method X is the definitive X-Class motor with unmatched power and torque in class.
Designed from scratch this motor is the updated version of the world best X-class motor
5025
Available in 350, 400 + 420KV. Other KV is possible. Please message us for info.
MOTOR WEIGHT
385g without wires.
12-14s capable.
​
HAND WOUND
10 pole 2Y hand windings for ultimate power and torque.
KO MOTORS UNIQUE DESIGN QUEUES
Unique design and styling that is unmatched in the FPV industry
CRYO TECH
Learn about the benefits of being CRYO capable.
RACE OIL X
Learn about the oil we developed for our motors.
We designed out Method X Motor around our very own custom made stator. This has been the result of countless hours of R&D and research using our decades of experience. We then hand wind the stator with a high temperature single wind. The design in conjunction with magnet choice gives us unmatched power in the industry.
LEADING THE INDUSTRY IN TERMS OF DESIGN
Here are some of the unique Industry first designs we use on the Method X
METHOD X - UNMATCHED DESIGN, QUALITY AND POWER
The Method X represents the pinnacle of X-Class motors. It is unmatched in power and torque and its design is truly next level. We have gone to extreme lengths to ensure that this motor is not only the best but it is way ahead of the curve.
MOTOR FEATURES 5025 - VARIOUS KV
BUILT IN ORGA PUMP TO DRAW OIL INTO THE BEARING AIDING COOLING AND EFFICIENCY.
30MM DIAGONAL M4 BOLT PATTERN FOR EASY FITTING TO MANY XCLASS SIZED FRAMES
CNC ANTI PROP
SLIP DESIGN.
SINGLE STRAND HAND WOUND STATOR WITH THE HIGHEST QUALITY WINDINGS.
ACTIVE CHOKE POINT TECHNOLOGY (PATENTED) TO IMPROVE COOLING ON THE STATOR DURING FLIGHT.
UNIQUE CRYO STATOR COATING (PATENTED) MAKING THE STATOR RESISTANT TO EXTREME CHANGES OF TEMPERATURE.
7075 ALUMINIUM HIGH
QUALITY BASE DESIGN.
UNIQUE OPEN CAGE
BEARING DESIGN TO
BE USED WITH OIL FOR
MUCH IMPROVED COOLING
N52SH HIGH QUALITY
MAGNETS.
FULL SPECIFICATION
Please email ben@ko-technologies.com for more information regarding this motor.
MAGNET
N52SH MAGNETS
BEARING
EZO 19 X 8
STATOR LAMINATE
0.15 NIKKON JAPANESE STEEL
SHAFT
HOLLOW TITANIUM
WEIGHT
395G
WIRE LENGHTH
400MM
VOLTAGE
12-14S
WIRE AWG
14 AWG
BELL MATERIAL
7075 ALUMINIUM
BASE MATERIAL
7075 ALUMINIUM
WIND INFO
220 DEGREE 99.9% PURE COPPER, 10 POLE 2Y.
COOLING
ACTIVE CHOKE POINT COMPRESSION
WINDING QC
TEST TO 500VOLT @ LOW AMPS
BALANCE
QC
DUAL STAGE DYNAMIC TEST FOR EACH BELL
Each Method motor has a built in chamber "wet sump" precisely engineered to hold a small amount of RACEX OIL. This feeds into the open case bearings via the patented KO orga main shaft.
​
While we use the very best EZO bearings possible there is still room for improvement and efficiency. This is achieved by adding a thin layer of RACEX OIL delivered by the orga pump. This gives the bearings a higher degree of tolerance for a highly balanced motor.
​
​
​
Each Method motor has been design and developed to work with our very own patented Cryo Technology. This includes a special covering on the stator to negate the effect of subjecting it to minus temperatures.
​
Cryo technology was developed to improve the peak operating envelope of the motor whilst delivering an initial power increase of up to 15% depending on ambient temperature conditions.
REMOVABLE BASE PLATE
With integrated wet sump and machined orga pump which draws oil into the bearings. This reduces friction and helps to dissipate heat.
​
OPEN CAGE BEARINGS
Our Method range of motors all use open bearings. This dramatically reduces friction and helps prevent heat soak.
​
ACTIVE CHOKE POINT
KO Technologies has developed ACPC to compress oncoming air directly at the bell spoke face, forcing the air past the spokes and directly into the stator and magnet assembly..
​
CRYO TECHNOLOGY
Our Method range of motors all use open bearings. This dramatically reduces friction and helps prevent heat soak.
​